BACK to hardware

Laboratory News :

AMD 700 Mhz "Duron" / 500 Mhz "K6-2" with USB

If you or your company can provide
a 90o PCI angle connector
a workstation case with integrated USB connector that is just large enough to contain an ATX 200W power supply, 3.5'' floppy disk, 3.5'' harddisk and the motherboard / graphics-
card combination displayed above
then don't hesitate to contact .

If you are interested in higher outlet numbers of the final
700, 500 or 700+500 Mhz workstation, then you should think about being able to deliver the avisaged "Biostar" ATX mainboard
a) the default jumper settings or auto-detect for a 700 Mhz AMD Duron or 500 Mhz K6-2 + adaptor (if necessary)
b) an integrated 4 or 8 MB standard graphics card that can be
switched off manually via jumper or via BIOS setup
(if necessary for later updates).
c) a dual processor version that supports the
AMD 700 Mhz Duron and the 500 Mhz K6-2
on one board and cooperates with standard multiprocessor operating systems like Windows NT (TM)

speed sensor with serial connector

this page has been updated on April-03-2001